LSI MegaRAID and megaclisas-status

I've been using LSI MegaRaid HBA's and I am quite fond of megaclisas-status (a wrapper script originally developped by the team at http://hwraid.le-vert.net/wiki/LSIMegaRAIDSAS).
I patched up a new version that:
a) displays more information (temp, SAS/SATA speed, LSI Disk ID)
b) displays information about unconfigured disks (those not in an array yet).

Here are some examples:
  • Dell PowerEdge T410 with 6 HDD's (now with native OS mapping):
$ sudo megaclisas-status
-- Controller information --
-- ID | H/W Model                  | RAM    | Temp | Firmware     
c0    | LSI MegaRAID SAS 9271-8i   | 1024MB | 88C  | FW: 23.32.0-0009 
c1    | LSI MegaRAID SAS 9280-4i4e | 512MB  | N/A  | FW: 12.15.0-0205 

 -- Array information --
-- ID | Type   |    Size |  Strpsz |   Flags | DskCache |  Status |  OS Path | InProgress   
c0u0  | RAID-1 |   1817G |  256 KB | ADRA,WT |  Enabled | Optimal | /dev/sda | None         
c0u1  | RAID-5 |  16370G |  512 KB | ADRA,WB |  Enabled | Optimal | /dev/sdb | None         
c1u0  | RAID-0 |    476G |  256 KB | ADRA,WT |  Enabled | Optimal | /dev/sdc | None         

 -- Disk information --
-- ID   | Type | Drive Model                                  | Size     | Status          | Speed    | Temp | Slot ID  | LSI Device ID
c0u0p0  | HDD  | WD-WMC300422505WDC WD20EFRX-68AX9N0 80.00A80 | 1.817 TB | Online, Spun Up | 6.0Gb/s  | 31C  | [252:4]  | 17      
c0u0p1  | HDD  | WD-WMC300421817WDC WD20EFRX-68AX9N0 80.00A80 | 1.817 TB | Online, Spun Up | 6.0Gb/s  | 31C  | [252:5]  | 18      
c0u1p0  | HDD  | WD-WX41DA40LCE5WDC WD60EFRX-68MYMN1 82.00A82 | 5.456 TB | Online, Spun Up | 6.0Gb/s  | 31C  | [252:0]  | 15      
c0u1p1  | HDD  | WD-WX41DA40L42RWDC WD60EFRX-68MYMN1 82.00A82 | 5.456 TB | Online, Spun Up | 6.0Gb/s  | 31C  | [252:1]  | 12      
c0u1p2  | HDD  | WD-WX61DA4HAKFZWDC WD60EFRX-68MYMN1 82.00A82 | 5.456 TB | Online, Spun Up | 6.0Gb/s  | 32C  | [252:6]  | 14      
c0u1p3  | HDD  | WD-WX41DA40LEF1WDC WD60EFRX-68MYMN1 82.00A82 | 5.456 TB | Online, Spun Up | 6.0Gb/s  | 30C  | [252:7]  | 16      
c1u0p0  | SSD  | 0000000011310344CFE3M4-CT512M4SSD2 070H      | 476.4 Gb | Online, Spun Up | 6.0Gb/s  | N/A  | [252:1]  | 11      

 -- Unconfigured Disk information --

  • Dell Precison T5610 with a boot SSD and an unconfigured HDD:
$ sudo megaclisas-status
-- Controller information --
-- ID | Model
c0 | LSI MegaRAID SAS 9271-8i (1024MB) FW: 23.32.0-0009

-- Arrays information --
-- ID | Type | Size | Status | InProgress
c0u0 | RAID-0 | 931G | Optimal | None

-- Disks information --
-- ID | Model | Status | Speed | Temperature | Slot ID | LSI Device ID
c0u0p0 | S1KRNEAFB01520M Samsung SSD 840 EVO 1TB mSATA EXT42B6Q | Online, Spun Up | 6.0Gb/s | 33C | ID: '[252:0]' | 1

-- Unconfigured Disks information --
-- ID | Model | Status | Speed | Temperature | Slot ID | LSI Device ID
c0uXpY | WD-WMC4N1837213WDC WD30EFRX-68EUZN0 80.00A80 | Unconfigured(good), Spun down | 6.0Gb/s | 32C | ID: '[252:1]' | 0

  • Dell Poweredge R730xd with HDD's and SSD's..
$ sudo ./bin/megaclisas-status
Password:
-- Controller information --
-- ID | H/W Model      | RAM    | Temp | Firmware     
c0    | PERC H730 Mini | 1024MB | 70C  | FW: 25.2.1.0037 

 -- Array information --
-- ID | Type   |    Size |  Strpsz | Flags | DskCache | Status  | InProgress   
c0u0  | RAID-1 |    558G |   64 KB | WB,RA | Disabled | Optimal | None         
c0u1  | RAID-5 |   4362G |  512 KB | WB,RA | Disabled | Optimal | None         
c0u2  | RAID-5 |   4362G |  512 KB | WB,RA | Disabled | Optimal | None         
c0u3  | RAID-1 |    558G |   64 KB | WB,RA | Disabled | Optimal | None         

 -- Disk information --
-- ID   | Type | Drive Model                      | Size     | Status          | Speed    | Temp | Slot ID  | LSI Device ID
c0u0p0  | HDD  | SEAGATE ST600MM0006 LS0AS0M24TZQ | 558.3 Gb | Online, Spun Up | 6.0Gb/s  | 32C  | [32:0]   | 0       
c0u0p1  | HDD  | SEAGATE ST600MM0006 LS0AS0M241MW | 558.3 Gb | Online, Spun Up | 6.0Gb/s  | 31C  | [32:1]   | 1       
c0u1p0  | HDD  | SEAGATE ST600MM0006 LS0AS0M241CM | 558.3 Gb | Online, Spun Up | 6.0Gb/s  | 29C  | [32:2]   | 2       
c0u1p1  | HDD  | SEAGATE ST600MM0006 LS0AS0M26QFF | 558.3 Gb | Online, Spun Up | 6.0Gb/s  | 28C  | [32:3]   | 3       
c0u1p2  | HDD  | SEAGATE ST600MM0006 LS0AS0M249GR | 558.3 Gb | Online, Spun Up | 6.0Gb/s  | 28C  | [32:4]   | 4       
c0u1p3  | HDD  | SEAGATE ST600MM0006 LS0AS0M27L87 | 558.3 Gb | Online, Spun Up | 6.0Gb/s  | 28C  | [32:5]   | 5       
c0u1p4  | HDD  | SEAGATE ST600MM0006 LS0AS0M28ZKN | 558.3 Gb | Online, Spun Up | 6.0Gb/s  | 28C  | [32:6]   | 6       
c0u1p5  | HDD  | SEAGATE ST600MM0006 LS0AS0M2Z9R7 | 558.3 Gb | Online, Spun Up | 6.0Gb/s  | 30C  | [32:7]   | 7       
c0u1p6  | HDD  | SEAGATE ST600MM0006 LS0AS0M3ADA5 | 558.3 Gb | Online, Spun Up | 6.0Gb/s  | 31C  | [32:8]   | 8       
c0u1p7  | HDD  | SEAGATE ST600MM0006 LS0AS0M2ZXL1 | 558.3 Gb | Online, Spun Up | 6.0Gb/s  | 28C  | [32:9]   | 9       
c0u1p8  | HDD  | SEAGATE ST600MM0006 LS0AS0M24HVE | 558.3 Gb | Online, Spun Up | 6.0Gb/s  | 28C  | [32:10]  | 10      
c0u2p0  | HDD  | SEAGATE ST600MM0006 LS0AS0M2R6T7 | 558.3 Gb | Online, Spun Up | 6.0Gb/s  | 28C  | [32:11]  | 11      
c0u2p1  | HDD  | SEAGATE ST600MM0006 LS0AS0M2YNSM | 558.3 Gb | Online, Spun Up | 6.0Gb/s  | 28C  | [32:12]  | 12      
c0u2p2  | HDD  | SEAGATE ST600MM0006 LS0AS0M24EYX | 558.3 Gb | Online, Spun Up | 6.0Gb/s  | 28C  | [32:13]  | 13      
c0u2p3  | HDD  | SEAGATE ST600MM0006 LS0AS0M2A3CQ | 558.3 Gb | Online, Spun Up | 6.0Gb/s  | 28C  | [32:14]  | 14      
c0u2p4  | HDD  | SEAGATE ST600MM0006 LS0AS0M2A3F5 | 558.3 Gb | Online, Spun Up | 6.0Gb/s  | 30C  | [32:15]  | 15      
c0u2p5  | HDD  | SEAGATE ST600MM0006 LS0AS0M21T9V | 558.3 Gb | Online, Spun Up | 6.0Gb/s  | 30C  | [32:16]  | 16      
c0u2p6  | HDD  | SEAGATE ST600MM0006 LS0AS0M2A341 | 558.3 Gb | Online, Spun Up | 6.0Gb/s  | 28C  | [32:17]  | 17      
c0u2p7  | HDD  | SEAGATE ST600MM0006 LS0AS0M2PZ3A | 558.3 Gb | Online, Spun Up | 6.0Gb/s  | 28C  | [32:18]  | 18      
c0u2p8  | HDD  | SEAGATE ST600MM0006 LS0AS0M2A300 | 558.3 Gb | Online, Spun Up | 6.0Gb/s  | 27C  | [32:19]  | 19      
c0u3p0  | HDD  | SEAGATE ST600MM0006 LS0AS0M246ZX | 558.3 Gb | Online, Spun Up | 6.0Gb/s  | 49C  | [32:24]  | 24      
c0u3p1  | HDD  | SEAGATE ST600MM0006 LS0AS0M241F8 | 558.3 Gb | Online, Spun Up | 6.0Gb/s  | 48C  | [32:25]  | 25      

 -- Unconfigured Disk information --
-- ID   | Type | Drive Model                         | Size     | Status                      | Speed    | Temp | Slot ID  | LSI Device ID
c0uXpY  | HDD  | SEAGATE ST600MM0006 LS0AS0M2450K    | 558.3 Gb | Unconfigured(good), Spun Up | 6.0Gb/s  | 27C  | [32:20]  | 20      
c0uXpY  | HDD  | SEAGATE ST600MM0006 LS0AS0M23X5E    | 558.3 Gb | Unconfigured(good), Spun Up | 6.0Gb/s  | 27C  | [32:21]  | 21      
c0uXpY  | HDD  | SEAGATE ST600MM0006 LS0AS0M2A3PC    | 558.3 Gb | Unconfigured(good), Spun Up | 6.0Gb/s  | 27C  | [32:22]  | 22      
c0uXpY  | SSD  | TOSHIBA PX02SMF080 A3AC64S0B052V0QN | 744.6 Gb | Unconfigured(good), Spun Up | 12.0Gb/s | 29C  | [32:23]  | 23      


This version doesn't do nagios but I like it better since it allows for easy display of the LSI disk IDs (see [252:digit] stuff in the outputs above).

This version is available at:
https://github.com/ElCoyote27/hwraid/blob/master/wrapper-scripts/megaclisas-status

I'm currently trying to contact the original maintainer to provide my patches..


Comments

  1. ZamriSeptember 27, 2022 at 7:05 PM

    Any news about your patch?

    ReplyDelete
    Replies
    1. ElCoyote_September 28, 2022 at 8:13 AM

      Which patch?
      FYI, most of the patches were merged upstream : https://github.com/eLvErDe/hwraid/blob/master/wrapper-scripts/megaclisas-status

      Delete

Post a Comment

Popular posts from this blog

LSI MegaRaid HBA's, overheating and one ugly hack

Image
Summer is here! Like many others, I have LSI MegaRaid HBA's that I use in desktop machines. These things are great but they tend to overheat and quite a few people have reported high temperature  findings (97C reported by the chip when idle'ing in both my Dell T410 and my Dell T5610): $  sudo megaclisas-status -- Controller information -- -- ID | H/W Model                  | RAM    | Temp | Firmware      c0    | LSI MegaRAID SAS 9271-8i   | 1024MB | 97C  | FW: 23.32.0-0009  c1    | LSI MegaRAID SAS 9280-4i4e | 512MB  | N/A  | FW: 12.15.0-0205  [...] I had never really bothered about the temperature but when I started to rebuild my T410's boot LD (Raid-1) to swap the 2Tb drives with 4Tb drives I had, things started to get complicated quickly. As soon as the mirror started rebuilding, the ROC temp (sitting around 97C) skyrocketted to 102C and soon enough the card shut down itself, dropping off the PCI-E bus and resetting the server. After machine reset, the
Read more

Some Tips about running a Dell PowerEdge Tower Server as your workstation

Image
Some use workstations as servers. I'm using servers as workstations. Over the years, I've changed computing gear on quite a few occasions. I've been using Tower Servers for the past 5 years and would like to share some tips to help others. But why would anyone want to do that?? - Servers are well integrated systems and are usually seriously designed and tested. - They offer greater expandability (6x3.5" hotswap bays in my previous T410, now 8x3.5" in my T430). - They usually include some kind of Remote Access Card (RAC) which is great for remote'ing in when all else has failed. - I can get tons of server equipment on ebay that will be compatible with that system. - Where else can I get 192Gb of ECC DDR4 RDIMM, dual 6-core Xeons and 8 hotswap bays? Tip #1 : Choose your chassis with care. Not all servers are created equal: - Rack servers are usually thin and noisy (those 8k rpm fans have the job of cool that 2U enclosure). It is n
Read more

VMWare Worksation 12 on Fedora Core 23/24 (fc23 and fc24)

Image
Update (20170321): VMware released VMW 12.5.4, which fixes all of the current issues with Fedora and the latest kernels (AFAIK). The hacks described on this page ARE NO LONGER NEEDED NOR MAINTAINED . Update (20160921): VMware released VMW 12.5, which is supposed to work fine out of the box.  I updated  Update_VMW.sh  to avoid patch anything -else- than VMW 11.x or 12.{0,1}. Please report back if you need assistance. Update (20160630):  I updated  Update_VMW.sh  to support Fedora Core 24 (fc24) for which the changes needed are the same. Please report back if you need assistance. Update (20160525): I updated my  Update_VMW.sh  script to patch the VMware kernel modules so they work on kernel 4.4.x and above (FC23+). Tested successfully with VMW 12.1.1. Update (20151209): This is still needed on 12.1.0 but I wrote a small tool to make everyone's life easier:  Update_VMW.sh VMWare workstation 12.0.1 Pro stopped working when I upgraded my FC22 desktop to FC23.  This is a ch
Read more